Filter
Top Products
38
Wall Mounting the Optical Communication Unit
You can use the Wall Mount Unit that comes with the Optical Communication Unit to
configure it for wall mounting.
1.Attach the terminal support to the Optical Communication Unit.
2.Secure the terminal support in place with the two screws.
3.Remove the two screws holding the hook in place. Next, move the hook to the right
side screw holes and secure it in place with the screws.
Left side Right side (Move hook here for wall-mounting.)
4.Remove the two screws (top and bottom) that secure the base of the Optical
Communication Unit.
The illustration on the right
shows when the hook on
the Optical Communication
Unit is removed.