Filter
Top Products
E-42
Connecting the USB Cradle Power Supply
Use the separately sold AC adaptor (AD-S42120AE) for the power supply of the USB
cradle. Always make sure to connect the AC adaptor to the USB cradle before
performing communication with the Handheld Terminal. Power to the Handheld
Terminal is supplied from the USB cradle.
1.Plug the AC adaptor into the AC adaptor jack on the back of the USB cradle.
DC IN 12V
2.After connecting the AC adaptor to the power cable, plug the plug of the power cable
into an electrical outlet.
3.
Set the selector switch on the back of the USB cradle to either one of the ports to be
used. Set the switch to position B when using the USB client port, or set to position A
when using the USB host port.
AB
IT600_E_P40_51.p65 05.10.25, 10:06 AM42