Filter
Top Products
E-28
Using the Laser Scanner
1.After turning on the power, position the laser scanner close to a bar code and then
press the trigger key.
2.The laser emits light and scans the bar code. If scanning is completed normally,
Indicator 2 displays a green light and a buzzer sounds.
Important!
• If you are unable to scan a bar code, try changing the angle at which the scanner
is held or distance from the scanner to the bar code, and then try scanning
again.
• This Handheld Terminal is capable of scanning bar codes at a distance of
about 40-300 mm (1
9
/
16
"-11
13
/
16
"). Furthermore, the distance at which
scanning is possible may vary according to the bar code symbology.
IT600_E_P14_39.p65 05.10.25, 9:50 AM28