Filter
Top Products
37
Synergy 3500 user guide ~ 3rd Edition ~ 21st October ’02 ~ 4461
Audible Message alert
When audible message is switched ON
and new messages have been received,
your Synergy 3500 will beep every
10 seconds. The volume of the beep is
at the volume you have set for the
loudspeaker. The default setting is OFF.
To change the answer delay
setting
Press and hold the SKIP
ᮣ
button on the base unit until
the current setting is
announced, then release.
Press and release the SKIP
ᮣ
button to move through the
settings, with each press the
options will be announced
and will also be shown on the
base unit display, i.e 8, 9,
Time Saver, 2, 3, 4, 5, 6, 7.
When you hear the setting
you want, do not press the
SKIP
ᮣ
button again. After a
short delay your chosen
setting will be announced.
To check the answer delay
setting at the base station
Press and release the SKIP
ᮣ
button.
The current setting will be
announced and also shown on
the base unit display.
To switch audible message alert
ON or OFF
Press and hold the
ᮤ
SKIP
button on the base unit to
change the setting.
The prompt will announce
“Message alert on/off” as
appropriate.
Skip
ᮣ
Skip
ᮣ
Skip
ᮣ
ᮤ
Skip
ANSWER MACHINE