Filter
Top Products
Synergy 3500 user guide ~ 3rd Edition ~ 21st October ’02 ~ 4461
12
1 Connect the power supply to
the base
Plan the location
Position your Synergy 3500 within 2
metres of a power socket and phone
socket otherwise extension cables will
be required.
Make sure it is at least 1 metre away
from other electrical products to avoid
interference.
Do not place your Synergy 3500 product
in the bathroom or other humid areas.
Setting up
Follow these steps to set up your Synergy 3500 ready for use
Plug the power adaptor into the mains
power socket and switch on. The green
Power/In Use light comes on. Your
Synergy 3500 will announce the default
settings of the answering machine, see
page 16, and the message counter will
be displayed.
Note
The base station must be plugged into
the mains power socket at all times.
Note
The message counter will flash
between O and C until the day and
time are set, see page 15.
Note
The Synergy 3500 has a range of up
to 300 metres outdoors and up to
50 metres indoors. The range will be
reduced when there is no clear line
of sight between the base and handset.
Thick stone walls can severely affect
the range.
SETTING UP