Filter
Top Products
35
Synergy 3500 user guide ~ 3rd Edition ~ 21st October ’02 ~ 4461
Message display on the
base station
The table opposite provides an
explanation of what is shown on the
base station display.
Your Synergy 3500 can digitally
record up to 13 minutes of messages,
with each message lasting a maximum
of 3 minutes. As well as recording
incoming messages, you can record
memos for other users.
You can operate your Synergy 3500
from:
• The base unit.
• The handset.
• Remotely from any external
Touchtone
TM
telephone.
Your Synergy 3500 comes with two
pre-recorded outgoing messages,
Answer and Record or Answer
Only, but if you wish you can record
your own.
You will need to set the day and
time (if you have not already done so)
so that you will know when each
message was received, see page 15.
Setting up and personalising
your answering machine
Ans.
on
off
Vol.
Page
DECT
Digital Clarity
ᮤ
Skip
Skip
ᮣ
Stop
Play
Del
DISPLAY DEFINITION
(Blank)
Power off.
C-0(flashing)
Day/Time needs to be set.
0-9
Answer-on mode, 0-9
messages.
9 (flashing)
10-59 messages. Indicating
more than 9 messages stored.
––
Power on, but set to answer off
Alternating
mode. The display flashes
with
between a dash and the number
0-9
of messages saved in the memory.
A (flashing) Handset menu and
Remote
access in progress.
E (flashing)
Error.
F (flashing)
Memory full.
P (flashing)
Message paused.
P-1:
When selecting or playing
Alternating
Answer & Record outgoing
between P&1
message.
P-2:
When selecting or playing
Alternating
Answer Only outgoing
between P&2
message.
r (flashing)
Message recording (memo,
outgoing message or incoming
message).
t or 2 to 9
Setting or reading answer delay.
8-0
Counting down.
ANSWER MACHINE