Filter
Top Products
8. Wall mounting
Rotate the handset clip half a turn. This holds the
handset in place when the phone is wall mounted.
Use the template on page 53 and a 6mm drill bit to drill
holes in the wall. Leave and 8mm gap between the screw
heads and the wall.
Place your BT Paragon 500 over the screw heads and
slide down.
9Getting started
Drill a suitable size hole in the wall
for screws, or wall plugs as
necessary. Prior to drilling, ensure
there are no buried obstructions
such as pipes or electricity cables
which might get damaged.
BT Paragon 500 – Edition 4 – 10.05.04 – 5840
WALL
WALL PLUG
SCREW
WALLDESK
Handset clip
5840 Paragon 500 SMS UG [3] 10/5/04 5:14 pm Page 9