BT PARAGON 500 Telephone User Manual


 
30
BT Paragon 500 – Edition 4 – 10.05.04 – 5840
Record a memo
You can record a message for other users. It is played
back just like a normal message.
1. Press then scroll to
ANSWERING MACHINE SET-UP
and press . Display shows
MEMO RECORDING
.
2. Press and hold . After the beep, speak your message
clearly.
3. Release to end recording. The play light will flash to
indicate a message has been left.
Ring delay
Answer delay sets the number of times your BT Paragon
500 will ring before the answering machine picks up your
call. The default setting is 4 rings. You can change this to
2-9 rings or time saver.
1. Press then scroll to
ANSWERING MACHINE SET-UP
and press .
2. Scroll to
RING DELAY
and press . The current
setting is shown. Press or to scroll to the setting
you want
2-9
rings or
TIME/SAVE
.
3. Press to select the option displayed.
Menu
Menu
Answering machine
Memos can be up to 3 minutes
long. Memos are stored in the
same way as incoming messages.
If you record your message via the
built in microphone, make sure you
are facing the BT Paragon 500.
Time Saver
Time Saver can save you the cost
of a call when you want to ring in
to find out if you have new
messages.
If your answering machine
answers after 2 rings, you have
new messages. If you have no new
messages it will answer after 5 rings.
So should you hear a third ring,
you can hang up before you are
connected, saving you the cost of
a call.
5840 Paragon 500 SMS UG [3] 10/5/04 5:14 pm Page 30