Filter
Top Products
6
Paragon 400 ~ 7th Edition ~ 24th May ’01 ~ 3703
SETTING UP
9V DC
LINE
HANDSET
1 Connect handset cord to base
Although optional we recommend fitting an
alkaline battery which will provide up to 25 hours
back-up and ensure your messages are saved
in the event of a mains power failure.
Ensure the Paragon 400 is disconnected from
the telephone line.
To fit the battery.
1 Lift the cover.
2 Insert one LR61 battery (not supplied).
The battery compartment must be fully closed
for the battery to work.
Battery low warning
The display indicates when the battery power is
low. If no battery is inserted, it remains lit.
4 Insert back-up battery
2
1
2
Plug the mains adaptor cord into the
back of the telephone
9V DC
LINE
The Paragon 400 automatically goes through a
start up process during which the display shows
INITIALISING and the monitor light flashes.
On completion the unit display will show the time
and number of messages.
3
Plug the mains adaptor into the wall
socket and switch on