Filter
Top Products
Plan the location of your
Paragon 400
Situate your Paragon 400 close enough to both
the phone and mains power sockets so that the
cables will reach.
Your Paragon 400 should be kept free of dust,
moisture, high temperature, vibration and should
not be exposed to direct sunlight. Do not stand
it on carpets or other surfaces which generate
fibres or place it in locations which prevent the
free flow of air over its surfaces.
5
Paragon 400 ~ 7th Edition ~ 24th May ’01 ~ 3703
Setting up
Follow these steps to set up your Paragon 400 ready for use.
Warning
The apparatus is designed to be operated in a
normal office or domestic environment where
the relative humidity does not exceed 75%.
It should not be used in bathrooms or near water.
SETTING UP
• Use only the power adaptor supplied.
• There is a slight chance that your phone
could be damaged by an electrical storm.
We recommend that you unplug your
Paragon 400 from the mains power and
telephone line socket during storms.
• The Paragon 400 will produce a certain
amount of heat during operation. Whilst this
is entirely safe we would advise against placing
the product on antique, veneered or wooden
surfaces as damage may occur.
• Do not use your Paragon 400 in damp, humid
conditions such as bathrooms.
• Do not expose the equipment to fire or water.
• Simply clean your Paragon 400 with a damp
cloth (not wet) or an anti-static wipe. Never
use a dry cloth as this may cause a static shock.
Safety