Filter
Top Products
On-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~ 4698
33
To register a handset to a base
station (if you have changed the
System Code from 0000)
At the base:–
Press and hold down the
ᮤ
SKIP button
until the PLAY button starts to flash.
On the handset:–
Use the UP or DOWN button to scroll
to
Base
.
Press OK to confirm.
The display will show
Register
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Custom
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to the required base number.
Press OK to confirm.
At this stage if you require you can edit
the base name.
Press OK to confirm.
Enter the System Code using the
keypad.
Press OK to confirm.
The display will now flash
Searching
for base
.
You will then see a list of the available
handset numbers.
Use the UP or DOWN button to scroll
to the number you require.
Press OK to confirm.
▲
▼
▲
▼
▲
▼
COK
COK
COK
COK
ᮤ
S
k
i
p
COK
COK
To check that the handset is registered press
talk to hear a dial tone.
At the base:–
Press and hold down the
ᮤ
SKIP button
until the PLAY button starts to flash.
On the handset:–
Use the UP button to scroll to
Base
.
Press OK to confirm.
The display will show
Register
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Automatic
.
Press OK to confirm.
The display will show
Searching for
base
.
After a few seconds the handset will be
registered and display:
▲
▼
COK
COK
COK
Base 1
Handset 2
ᮤ
S
k
i
p
Note (cont)
If you have registered your handset to more
than one base you can prioritise which base
you want your handset to use. For instructions
on base station priority, see page 21.
▲
▲
▼
COK