Filter
Top Products
On-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~ 4698
25
It is possible to adjust the time available
for a caller to leave a message.
The options are 30 seconds, 2 minutes,
4 minutes and unlimited message
length. The default setting is 2 minutes.
The answer machine can store up to
32 messages approximately 15 minutes
in total.
Use the UP or DOWN button to scroll
to
Base
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Base settings
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Answer
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Duration
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to the required message length.
Press OK to confirm.
▲
▼
▲
▼
▲
▼
COK
COK
COK
To adjust the time allowed for
recording incoming messages
▲
▼
▲
▼
COK
COK
After recording a new outgoing
message the machine will automatically
switch itself on.
At the base:
To switch on Answer and Record
mode:
Press the ANSWER button until it is
illuminated green. You will hear
“Answer on”. (Note that you must have
recorded an answer and record
outgoing message.)
To switch on Answer Only mode:
Press the ANSWER button until it
flashes green. You will hear “Answer
on”. (Note that you must have recorded
an answer only outgoing message.)
At the handset:
Use the UP or DOWN button to scroll
to
Answer machine
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Answer on
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Answer and record
or
Answer only
.
Press OK to confirm.
After switching on the answering
machine the appropriate outgoing
message will be played in the earpiece.
When answer and record mode is
selected the ANSWER button is
illuminated green. When answer only
mode is selected the ANSWER button
flashes green.
▲
▼
▲
▼
COK
COK
COK
To switch answering machine on
▲
▼
A
n
s
w
e
r
A
n
s
w
e
r
A
n
s
w
e
r
A
n
s
w
e
r
Note
If you use your BT On-Air 2300 SMS behind
a PBX, please ensure that you set the network
connection to private mode. Please refer to p36,
“To change the network connection”.