Filter
Top Products
30
On-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~ 4698
Remote access
You can operate your answering machine from
any external Touchtone
TM
phone by phoning your
BT On-Air and entering your remote access code.
Having a remote access code prevents other
people from accessing your answering machine
functions without your permission.
Important
You must change the Remote Access Code
from the default setting of
0000
for your
remote access to function.
Press OK to confirm.
The display will ask you to
Confirm code
.
Re-Enter your new code.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Base
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Base settings
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Answer
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to
Remote acc
.
Press OK to confirm.
Enter your old four digit code. (Factory
setting is
0000
)
Press OK to confirm.
Enter your new four digit code.
To change your Remote
Access Code
COK
COK
COK
If you forget to switch your answering
machine on you can do it from another
telephone:
Dial your telephone number and let the
phone ring. After approximately 10 rings
your BT On-Air will automatically answer,
although you will hear no message.
At this point press the
#
button.
You will hear, “Please enter your security
code”. Enter your remote access code.
Wait for the confirmation tone then
press 7.
Your answering machine will now be
switched on.
To switch on your answering machine
from another external telephone
7
P
Q
R
S
▲
▼
▲
▼
COK
COK
▲
▼
COK
▲
▼
COK
WARNING
If you enter your old code incorrectly the
display will show
Bad Code
. Please check that
you have not changed the code. Press the
C button twice to exit and try again with the
correct code.
If you have forgotten your remote access code
you should call the Helpline on 0870 240
4682 and you will be advised on how to reset
your telephone to its factory settings.