Filter
Top Products
Insert a pause in a number
You may need to do this if you are
connected to a switchboard. When
entering a number, usually after
entering the switchboard access
code (e.g. 9) press and hold 0 until
P appears in the display.
Dial/view a number
1. Press to open the directory. The first entry is
displayed.
2. Press or to scroll through the directory to the
entry you want.
Or, search alphabetically, using the keypad to enter the
first letter of the name you want, then scroll to the exact
entry using the and buttons.
3. Press , then to display
Select
and to confirm.
4. The selected entry will be displayed ready to be dialled
out. Press or to dial.
Edit a directory entry
1. Press to open the directory. The first entry is
displayed.
2. Press or to scroll through the directory to the entry
you want.
3. Press then to display
Change
and press again
to select.
4. The stored number is displayed followed by a flashing
cursor. Edit the number using to delete incorrect
digits and enter new ones using the keypad, then
press .
Searching for a name
Example: To search for Oliver,
press 6 three times to display the
first entry beginning with O, then
use and to scroll to Oliver.
Directory 27
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com