Filter
Top Products
Call timer
Your handset automatically
displays the duration of every
external call. The call time will
remain on the display until 2
seconds after the call has ended.
Press to delete an incorrect
digit.
Make a call
1. Press .
Enter the telephone number and the number is dialled.
Preparatory dialling
Use preparatory dialling to see and check the number on
the display before you dial out. The display can only
show 12 digits at a time, if you enter a number with
more than 12 digits, 3 dots will be displayed to the left
of the number to indicate more digits.
1. Enter the number first then press or to dial.
End a call
1. Press or place the handset back on the base.
Receiving calls
When you receive an incoming call, the telephone will
ring and the icon will flash. If the ringer is set to off,
the phone will not ring but you will hear one short beep
tone to alert you.
1. If the handset is not in the base/charger, press or
to answer the call.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
Using the phone
16
If you have subscribed to a Caller
Display service, your caller’s
number will also be shown. If the
number is withheld the display will
show
Withheld
. If an exact
number match is found in the
Directory, the name will be
displayed instead of the number.
See page 37 for more information.
Internal calls
When you receive an internal call,
the calling handset number will be
shown on the handset display.