BT 1200 Cordless Telephone User Manual


 
34
To register an additional handset
Press and hold the INTERCOM
button on the base unit for 5
seconds. The base unit will beep
and the
IN USE light will flash.
When the
IN USE light begins to
flash, release the
INTERCOM
button and place the additional
handset on the base unit.
Your additional handset is
registered automatically and you
will hear a confirmation beep and
the
IN USE light will stop flashing.
Freestyle 90/130/1200
Additional Handsets
You can buy and use up to 3
Freestyle additional handsets with
your Freestyle 1200 to extend your
phone system, without needing to
install extension sockets for each
new phone.
Each additional handset is supplied
with its own charger and user
instructions, but the following
information will tell you how to
register and use an additional
handset with your Freestyle 1200.
Registering your handset
You must register your Freestyle
additional handset before it can be
used with your Freestyle base unit.
Make sure that each additional
handset is registered with a
different number (2, 3 or 4) so it
can be identified from other
additional handsets.
INTERCOM
Your additional handset must be
placed on the base unit within five
seconds of the IN USE light flashing.