BT BT Versatility Telephone User Manual


 
BT Versatility
Installation and maintenance Manual
6
BT Versatility Options MDF MTC 007261
BT Versatility Mod Retentn Long 1/4 turn Screw MTC 007262
BT Versatility V16 Console to V16 Connection Cable MTC 007263
BT Versatility V16 PSU MTC 007264
BT Versatility PSTN Module MTC 007265
BT Versatility ISDN2 Module MTC 007266
BT Versatility Voice Mail Module 2 Port MTC 007267
BT Versatility Voice Mail Module 4 Port MTC 007268
BT Versatility Battery Backup Module MTC 007269
BT Versatility Door Intercom MTC 007270
Installation checklist
Carry out the following steps to install the system:
FIRST, read the safety and precaution information on page 3 carefully.
SECOND, mount the Main Equipment as detailed in the section on page 7
THIRD, install the Network and Expansion modules as required
At least one Analogue Line Module must be installed to access the Analogue network.
At least one ISDN Basic Rate Module or ISDN Primary Rate Module must be installed to access the
ISDN network.
A Ports module must be installed if the following is required:
More than 8 Extensions
More than four Analogue Lines
More than two ISDN Basic Rate Accesses
More than one ISDN S-bus
If no options module is installed "External Music on Hold" can be provided through the MOH Module
connected to an extension. See page 33 for details on connection of the unit.
An Internet module must be installed if an internal LAN or connection to an ADSL Line is required
A Voice Module must be installed to provide Voicemail or Auto Attendant functionality.
The Battery Back Up Module and battery must be installed if battery back up is required.
FOURTH, cable the Extensions to the Main Equipment and install the system Featurephones and standard
telephones as detailed in the Cabling Section Page 31 . This section also covers installation the following:
Long-line Extension,
Door Intercom,
Doorstrike,
Central Bell,
External Music-on-Hold,
Public Address
V24 Interface to provide Call Logging.
FIFTH, cable the Analogue and ISDN Line connections as detailed in the cabling section Page 31.
SIXTH, commission the system and provide customer training as detailed in the Commissioning section
Page 46 and 47.