Filter
Top Products
15
Using your Synergy 2100
additional handset
Press buttons in the order shown
Press and hold the POWER
button until the display
goes blank. The handset is
now off.
Press the POWER button
again. You hear two beeps.
The display flashes
Searching and then shows
the standby screen.
To switch your handset ON
and OFF
S
e
c
r
e
c
y
S
e
c
r
e
c
y
Synergy 2100 - Edition 3 – 31st May ’00
Press the INT button. Display
shows the INT symbol and
Internal
.
Enter the handset number
you want. Display shows
the number and the called
handset rings.
To call another handset
Int
Your caller is put on hold and
you hear the dialling tone.
KEYPAD
Enter the handset number to
which you want to transfer
the call. When the handset is
answered press the END
button and the call
is transferred.
If the handset is not
answered, press the INT
button to speak to the
caller again.
To transfer an external call to
another handset
Int
USING ADDITIONAL HANDSET
All of the features of the Synergy 2120 and Synergy 2150 are available on your
Synergy 2100, depending on which base station you have your additional handset
registered to. Please refer to your main user guide for operational instructions.
Press the END button to end
the call.
Synergy 2100 1/6/2000 3:07 pm Page 13