Filter
Top Products
9
Safety instructions
Use only the approved battery
pack supplied. Spare batteries
– Item Code: 871996 are
available from BT Shops and the
Synergy Helpline 0845 602 1041.
Do not try to use any other power
supply except the one provided,
otherwise you may permanently
damage your Synergy 2100. It may also
invalidate approval of this apparatus.
To get a replacement Synergy 2100
charging cradle power supply unit –
Item Code 872040 – contact the
Synergy Helpline 0845 602 1041.
There is a slight chance your
phone could be damaged by
an electrical storm. We
recommend that you unplug your
Synergy 2100 from the mains power
and telephone socket during storms.
The Synergy 2100 will
produce a certain amount of
heat during operation. Equally,
the handset as well as any additional
chargers you purchase can also become
warm during charging. We advise
against placing these products on
antique, veneered or wooden surfaces
as damage may occur.
Do not use the Synergy 2100
in damp, humid conditions
such as bathrooms. Do not
expose the equipment or batteries to
fire and water.
Do not dispose of used
batteries with general
household rubbish and do not
burn them.
Do not use the handsets in
places where there are
explosive hazards.
If you wear a hearing aid,
please note that the Synergy
2100 works by sending radio
signals between the base station and
handset. These signals can interfere
with hearing aids, causing a humming
noise.
Synergy 2100 can interfere with other
electrical equipment, e.g. answering
machines, TV and radio sets, clock
radio/alarms and computers if placed
too close. It is recommended that you
place your Synergy 2100 at least one
metre away from such appliances to
minimise any risk of interference.
Synergy 2100 - Edition 3 – 31st May ’00
SAFETY INSTRUCTIONS
Synergy 2100 1/6/2000 3:07 pm Page 7