Filter
Top Products
To adjust the handset
ringer volume
You can adjust the handset
ringer volume when the
handset is not in use.
There are 3 settings, HIGH,
LOW and OFF.
The default setting is HIGH.
Press the
DOWN button to
reduce the volume.
To switch the ringer volume
OFF, press the
DOWN button
and hold for 2 seconds until
you hear a confirmation beep.
To adjust the volume, press
and release the UP button.
The ringer will be set to the
LOW level.
Press
and release the UP
button again to set the
volume to HIGH.
You will hear a sample ring
on each press.
▼
▼
▲
▲
Enter the telephone number
you want to store.
Press the
QUICKDIAL
button to confirm.
You will hear a confirmation
tone.
Q
u
i
c
k
d
i
a
l
To dial a number in the
Quickdial memory
Press the TALK button.
Press the
QUICKDIAL
button.
Enter the location number
between
0 and 9, under
which the number is stored.
The number is dialled
automatically.
Q
u
i
c
k
d
i
a
l
0-9
To delete stored numbers
Any existing number stored
in the One touch or Quickdial
memories can be overwritten
by entering a new number
under the same location.
Simply follow the steps
under the storing numbers
sections previously shown.
Note
There is a quickdial memory label
included in your packaging. You can
use this to keep a record of which
location number you have used for
each telephone number.
Remove backing from memory label
and place centrally into handset
cradle on base unit as shown.
123
14
Quartet 1100 User Guide – Edition 5 – 17.8.00