Filter
Top Products
User Guide – BizTouch™ IP2
50 Stiles Road • Salem, NH 03079 • 603-870-9400 • www.bizfon.com
© 2004 InSciTek Microsystems, Inc. All rights reserved. Bizfon is a registered trademark. All other names may be trademarks or registered trademarks of their
respective owners
Revised: 31 January 2005 Page 1
Congratulations! You’re the new owner of a BizTouch™ IP2 VoIP phone. This phone will make it easy for you to
place and receive calls when using the Bizfon 7000 system.
GETTING STARTED
What is in the box?
Check out the contents of the box your phone came in. You should have:
• BizTouch™ IP2 phone (including base)
• Power supply
• Handset with cord
• This guide
You will also need:
• Ethernet cable to connect the phone to the network
Connecting the Phone
We’ve taken all the challenge out of connecting your phone properly. Follow these steps to connect:
1. Plug one end of the Ethernet cable into the Network jack on the back of the phone. Plug the other end into your
Ethernet jack on the wall.
WARNING: DO NOT CONNECT TO AN ANALOG PHONE LINE.
2. The phone contains an Ethernet switch. A computer may be connected to the network through the phone’s PC
port.
3. If you’re using Power over Ethernet (PoE), the power to the phone was supplied when you connected the
Ethernet cable. Skip this step.
4. If you’re not using PoE, connect the power cable into the phone, then plug the other end into an outlet. It’s a good
idea to use a surge suppressor.
5. After applying power, the phone will initialize itself. You can watch its progress on the phone’s screen. A normal
sequence would include:
a. Bizfon Logo appears.
b. Starting network.
c. Loading configuration files.
d. Station Init complete.
e. After successful startup, the phone will display date, time, your name, etc.
f. If the phone does not follow this sequence or displays an error, contact your system administrator.