Avaya 3616 Wireless Telephone and Desktop Charger
with CCMS
The surface of the handset may be cleaned occasionally
with disinfectants used for general cleaning in a medical
environment. Isopropyl alcohol may be used occasionally
applied by a damp cloth or paper towel. When using
alcohol, do not rub the keypad characters vigorously.
Doing so will significantly degrade legibility.
• Do not use furniture polishes, waxes or plasticizer-
based cleaner (Armor All™, etc.)
• Do not use lanolin, aloe, glycerin or other skin care
type products.
• Do not apply any solvent such as acetone, mineral
spirits etc.
• Do not directly spray or immerse the handset.
Should the headset connector become dirty, a scratchy or
intermittent signal may be experienced. To clean the
connector, dip the non-padded end of either a wooden or
paper handled cotton swab in isopropyl alcohol. Gently
insert in the connector and twist, repeating several times.
If available, blow compressed air into the connector to
clear debris.
Page 20 555-301-709
Issue 3