Filter
Top Products
Avaya 3616 Wireless Telephone and Desktop Charger
with CCMS
Setting User Preferences
When the Wireless Telephone is in standby mode (on but
not in use), press and briefly hold
FCN to display user
options. Check with your system administrator for specific
features supported by your Wireless Telephone.
DOWN button
displays next menu item.
UP button
displays previous menu item.
SELECT button
selects or changes item.
UP softkey or FCN
returns to previous menu level.
Power Off/End Call or
press FCN a 2
nd
time
exits menus
User Option Menu
Action:
Ring Type
Select Telephone Ring to set the
standard ring on the Wireless
Telephone.
Normal: is the factory default ring.
Vib/norm ring: vibrates for 5
seconds and then rings.
Vibrator ring: vibrates for a non-
audible call alert.
Press 0 to select
desired ring type. The
ring type currently set
displays with an
asterisk.
Noise Mode
Adjusts the Wireless Telephone to
account for background noise.
Normal: for most office
environments
High: for moderate background
noise
Severe: for extremely noisy
conditions.
Select an option that
describes the noise in
your environment.
Current IP address
In IP systems, the IP address of the
Wireless Telephone is displayed.
This number may not be edited.
None
Call Server IP
The IP address of the call server.
This number may not be edited.
Call Server Port
The call server port used by the
phone. This number may not be
edited.
(Additional options may be present. Contact your system administrator for information.)
Page 14 555-301-709
Issue 3