Filter
Top Products
Page 6 - Clearing a Call Basic Call Handling Features
Clearing a Call
To clear an established call either:
1. Replace the handset
or
2. Press
Drop.
Redial
The Redial (or Last Number Dialed) feature automatically redials the last extension or
outside number (up to 24 digits) you dialed.
To redial the last number that you dialed:
1. Press
Redial.
Headset Working
If a headset is to be used on your 5602, it must replace the handset. E.g. unplug the
handset (from the socket on the side of the 5602) and replace with the headset cable.
Discard the handset.
To answer an incoming call:
1. Press the call appearance key next to the flashing bell icon (
) and speak.
To clear a headset call:
1. Press
Drop.
To manually make a call:
1. Dial the number (remember to include the required access code (for example, 9) for
an outside line) and listen to the progress of the call.
To automatically make a call you can:
1. Automatically dial the last number that you dialed by pressing
Redial.
Speaker
The Speaker facility allows you to monitor incoming calls only. You must use the
handset to speak to the caller. You can also use Speaker to terminate an existing call.
The
Speaker button switches the speaker on/off. The light associated with this
button turns on when the speaker is active.
Mute
With a call in progress, you can stop the other party from hearing you. This feature
works for both handset or headset working
To switch off your handset/headset microphone:
1. Press
Mute. The lamp beside MUTE comes on.
Page 6 - Basic Call Handling Features IP Office (R3.0) 5602 User’s Guide
Clearing a Call 40DHB0002UKFK – Issue 1 (7th February 2005)