Filter
Top Products
Voice Portal
The above information is provided by AVAYA Inc. as a guideline. See disclaimer on page 1
10
5.3 CONFIGURE HUNT GROUP FOR VOICE PORTAL STATIONS
You will need to create a hunt group for the stations you defined for Voice Portal.
The group extention is the pilot number that is used to call the application. In Figure
(below) the Group Extension shown as 7915 is only an example.
Figure 8: HUNT GROUP - Tab 1
When creating a Hunt Group, whatever name or number you enter in the Group
Name field will appear on the telephones calling into the application.
The screen below shows examples of a Group Name and Group Extention. The rest
should be left as default.
Note
: Make sure you set the ISDN Caller Display Field to "grp-name" (see
below). This enables you to display the name as entered in the Group
Name field in the Hunt Group form (see below), on users’ telephone
displays when calling into Voice Portal.
5.3.1
SETTING EXTENSION NUMBERS IN HUNT GROUP
Here is where you will enter the extension numbers created for Voice Portal. These
are the group of numbers associated with the pilot number you defined earlier.
NOTE
: Hunt Groups can contain as many as 1000 numbers. Enter only the
numbers you have defined for your application (see section 5.2 in this Config Note).
Establishing the Hunt
Group/Pilot #
---
Enter whatever name you
want here. This name will
appear on the display of the
phones calling Voice Portal.
---
Set ISDN Caller Display to
“grp-name”