Filter
Top Products
19
Getting Started
Adjust the
speaker volume
Press the volume up/down buttons on the side
of the handset during the call.
Adjust the
headset volume
Press the volume up/down buttons on the side
of the handset during the call.
Place a call on hold Press the
Hold softkey.
Resume a held call Press the
LINE key followed by the line
number key.
Mute/unmute the
microphone
Press the
Mute softkey.
Hang up Press the
END key. Be sure to do this at the
end of each call to return to the standby
mode.
Change profile Press the
Prof softkey in standby mode and
use the
Nav keys to select a new profile.
The selected profile is marked with an
asterisk (*).
Edit the phonebook Press the
Phbk softkey from standby mode.
Display additional
features
During a call press the FCN key to display
additional features that have been
customized for your facility.
Turn on the backlight The backlight comes on when any key is
pressed or when there is an incoming call and
stays on for 10 seconds. It turns off after 10
seconds if another key is not pressed within
that period.
If you want to Then
21-601633_1.book Seite 19 Freitag, 13. Juli 2007 4:42 16