Filter
Top Products
16
Getting Started
Basic Handset Operation Summary
If you want to Then
Remove the
Battery Pack
Press down on the latch on the Battery Pack
at the back of the handset and pull the
Battery Pack towards you. The Battery Pack
releases outward.
Replace the
Battery pack
Slide the lip of the Battery Pack into the
bottom of the cavity. Push the top of the
Battery Pack until it snaps into place. You
should not have to force it into the handset.
Turn handset on Press and hold the
END key until two chirps
sound.
Turn handset off Press and hold the
END key. One chirp will
sound. If you are in a call, hang up first, then
turn off the handset.
Unlock the keypad Press the
Unlk softkey, then #, to unlock the
keypad.
Lock the keypad Press the
Cfg softkey then NavOK, to
manually lock the keypad.
Make an internal call Press the
START key, wait for a dial tone,
then dial the extension.
Make an external call Press the
START key, wait for a dial tone,
then dial the number just as you would from
your desk phone.
21-601633_1.book Seite 16 Freitag, 13. Juli 2007 4:42 16