Filter
Top Products
Avaya Inc. Desktop Charger, Dual Charger, and Quad Charger User Guide
Dual Chargers
3616 WT 3626 WT
In DCE200 Dual Charger in DCX200 Dual Charger
Overview
The Avaya Dual Charger is a two-slot desktop charger. Model
DCE200 is designed to charge the BPE100 Battery Pack in the
3616 WT and a spare BPE100 Battery Pack; Model DCX200 is
designed to charge the BPX100 Battery Pack in the 3626 WT
and a spare BPX100 Battery Pack, Model DCN200 is designed
to charge the BPN100 Battery Pack in the 3620 WT and a spare
BPN100 Battery Pack. The models are not interchangeable.
Set up the Dual Charger by first obtaining the appropriate Avaya
power supply for the country or region. Place the Dual Charger
on a flat, horizontal surface and plug the power supply into the
Dual Charger and into an appropriate wall outlet.
The user must end any call in progress by pressing the
End Call
key on the WT before placing it into the Dual Charger. Do not
remove the Battery Pack. The WT may be off or in standby
mode during charging.
Place the handset face forward into the Dual Charger front slot.
Place a spare Battery Pack in the rear slot, charging contacts
down. The front slot takes charging precedence; the Battery
Pack in the rear slot will begin charging when the handset in the
front slot is fully charged or when the front slot is empty.
Indicator light
When the handset or Battery Pack is seated correctly, the
corresponding indicator light will come on. A bright indicator
means the Battery Pack is charging, a dim indicator means the
Battery Pack is waiting to charge. The indicator light will not
come on when the handset is incorrectly seated, the slot is empty
or when the Dual Charger has no power applied. If the indicator
light is off or flashing, it means the handset or Battery Pack is
incorrectly seated. Remove the handset or Battery Pack and
reinsert. If the LED continues to blink or starts blinking at any
time during the charging process, it indicates that there is a
21-300632, Issue 1, July 2005 Page 25