Avaya 2050 Telephone User Manual


 
2030 & 2050 Telephone User Guide Page 33
IP Office 40DHB0002UKAG Issue 7c (17th May 2004)
Ringer Controls
Changing the Ringer Volume
While altering the volume, the phone rings.
To change the ringer volume
:
1. Press PROGRAM and then zRINGER.
2. Enter the phone's passcode (see The Phone Passcode
).
3. Press zVOLUME. The display shows a slider. Adjust this using the z-keys on its left (softer) or
right (louder).
4. Press zDONE and then press PROGRAM twice to finish.
Changing the Ringer Sound
The ringer sound contains three tones. You can adjust the 'mix' of these to achieve your own distinctive
ring. While doing this the phone rings.
To change the ringer sound
:
1. Press PROGRAM and then zRINGER.
2. Enter the phone's passcode (see The Phone Passcode
).
3. Press zSOUND. The display shows a slider. Adjust this using the z-keys on its left and right.
4. To select another part of the sound to adjust, press zTONE. This changes the slider to a different
tone.
5. Press zDONE and then press PROGRAM twice to finish.
Switching the Ringer On/Off
You can switch the ringer on or off for internal and/or external calls. This does not affect the information
displayed.
For internal calls you can also select AUTO ANSWER to connect internal calls after giving just a single
ring.
To switch the internal or external ring on/off
:
1. Press PROGRAM and then zRINGER.
2. Enter the phone's passcode (see The Phone Passcode
).
3. Press zSCROLL and then press zEXTERNAL or zINTERNAL. The display shows the current
setting.
4. To change the ringer mode, press zCHANGE to select ON, OFF or AUTO ANSWER.
5. Press zDONE and then press PROGRAM twice to finish.