Filter
Top Products
2030 & 2050 Telephone User Guide Page 21
IP Office 40DHB0002UKAG Issue 7c (17th May 2004)
Diverting Calls
Setting Divert Numbers
You can set separate divert numbers for All (also called Forward Unconditional) and for On Busy/No
Answer. Note that divert on no answer does not work if you also have voicemail.
For divert all you can also create a set of 'targets'. This then allows you to set the number to which you
divert calls by selecting from a list of names.
To set a divert number
:
1. Press PROGRAM and then DIVERT.
2. Enter your phone's passcode (see The Phone Passcode
).
3. Select ALL, NO ANS or ON BUSY. If you want to set a divert all target see below.
4. The display shows the current diversion number (if set).
5. Press zCANCEL and then dial the new number.
• You can use zSET or zCLEAR to switch use of the divert on or off.
6. Press zDONE and select another divert if required.
7. Press PROGRAM to finish.
To set divert all targets
:
1. Press PROGRAM and then DIVERT.
2. Enter your phone's passcode (see The Phone Passcode
).
3. Press SCROLL and select zTARGETS.
4. If you already have target numbers set the first is shown along with its associated name. Press
zNEXT to display the next target if set. Use zEDIT to alter the current displayed target.
5. If you want to create a new target, press SCROLL and select zNEW.
• Enter the target name. To do this press the key with the required character. Press
zROTATE to change the character to the one required. Use the z key on the left of the
name to delete the last character. Use the z key on the right of the name to add spaces.
When you have completed the name press zDONE.
• Enter the number for the target. Use zCANCEL to remove any existing number or
zRENAME if you need to change the name again. When both the name and number are
set as required press zDONE.
6. To finish, press SCROLL. Press DONE and then DONE again. Press PROGRAM.