Filter
Top Products
2030 2050 User Guide
2030 & 2050 Telephone User Guide Page 22
IP Office 40DHB0002UKAG Issue 7c (17th May 2004)
Switching Divert All On/Off
When divert all is on, a z-appears above the DIVERT key. You also hear broken dial tone if you lift the
handset or press ANSWER RELEASE but you can still make calls.
When on, all your calls go to the Divert All number (if you have no divert all number set, users receive
busy instead).
If diverting to an internal extension, that extension can call you and transfer calls back. Switching
DIVERT on cancels group or no calls.
To switch divert all on/off
: (no targets set)
1. Press DIVERT.
To switch divert all on
: (targets set)
1. Press DIVERT. The list of targets is shown.
2. Press the z key next to the target to which you want to divert your calls.
To switch divert all off/change target
: (targets set)
1. Press DIVERT. The list of targets is shown.
2. The flashing z key indicates the target in use. Press this to key to switch it off or select another
target to change the divert destination.
Switching No Calls On/Off
Pressing NO CALLS switches it on or off. When on, if you lift the handset or press ANSWER RELEASE
you will hear broken dial tone, but you can still make calls.
Any caller will hear a ringing tone and then be connected to your voicemail.