Filter
Top Products
Administering Telephone Options
82 Avaya one-X™ Deskphone Value Edition 1600 Series IP Telephones Administrator Guide Release 1.0
Static Addressing Installation
The usual way to assign IP addresses to IP telephones is the automatic method. There might
be times, however, when manual assignment of IP addresses is desired.
!
CAUTION:
CAUTION: Static addressing is necessary when a DHCP server is unavailable.
Because of the increased opportunities for text entry errors associated with static
addressing, we very strongly recommend that a DHCP server be installed and
static addressing avoided.
Use the following procedure to invoke manual address information programming.
1. Start manual address programming by performing one of the following steps:
a. During normal DHCP processing, press the * key while “* to program“ displays during
the DHCP process.
or
b. While the telephone is on-hook and idle, press the following sequence of keys on the
faceplate of the telephone:
Mute 2 3 3 7 # (Mute A D D R #)
Protocol: cccccccc
filename.ext
cccccccc Ethernet
bootcodename
Up to 8 ASCII characters, currently only
“H.323.”
4 to 32 ASCII characters. The name of
the primary ("big app") image file
currently stored in the telephone
(endptAPPINUSE).
2 to 7 ASCII characters, either
“100Mbps”, “10Mbps”, or “No”
depending on the current speed of the
Ethernet line interface.
1 to 32 ASCII characters. The name of
the backup ("little app") image file
currently stored in the telephone
(endptBOOTNAME).
Table 9: Parameter Values (continued)
Name System Value Format
3 of 3