Filter
Top Products
Wireless Phone Installation
Wireless Installation and Configuration Guide Page 33
IP Office [15-601082] Issue [1] (1 June 2006)
AVPP Network Configuration
Title State Comment
Ethernet Address
(fixed):
00:90:7A:01:24:93 Leave as default
IP Address: 192.168.42.3 The AVPP unit
Hostname: Sample1 System host
name
Subnet Mask: 255.255.255.0 Leave as default
Default Gateway: 192.168.42.1 IP Office unit
AVPP TFTP
Download Master:
192.168.42.1 PC containing
AVPP software
Primary DNS Server: NONE Leave as default
Secondary DNS
Server
NONE Leave as default
DNS Domain: NONE Leave as default
WINS Server: NONE Leave as default
Workgroup: WORKGROUP Leave as default
Syslog Server NONE Leave as default
Maintenance Lock: N Leave as default
Phone Setup
Boot up the phone by simultaneously pressing Power On/Start Call and Power Off/End Call. Release
Power On/Start Call while still holding down Power Off/End Call. The MAC address is displayed.
To edit and access, press Up, Down and Select on the left side of the phone.
To navigate back one screen, press FCN.
To end programming, press Power Off/End Call.
To search for Network Config, press Down. To access configuration parameters, press Select.
Configure the following information on the phone:
Title State Comment
IP Address Static or DHCP Select IP address mode
ESS ID
(SSID)
Network Name (SSID) SSID of the access point
License
Mgmt
9 Leave as default
Encryption Match the configuration on
the access point
Ext. Extension Number Use the extension number
created from User
Password Extension Password Enter password for the phone
extension from User