Avaya 10U100 Telephone User Manual


 
20
6
trouble
ENGLISH
shooting
The remote
does not ring
I cannot hear
a dial tone
PROBLEM
ITEMS TO CHECK
Make sure that the Ringer is “On”.
Ensure that the Telephone Cord and the AC
Adapter are installed correctly.
Recharge the Remote Battery by firmly placing it in
the Remote Charging Well .
Disconnect the AC Adapter from the power source and
reconnect it in a known good outlet.
Use the Remote in an area closer to the Base .
Make sure your Remote Rechargeable Battery is
securely seated in the Charging Well and/or fully
charged. The Battery may need to be charged for
8 hours prior to first use.
Check that all cords are correctly connected and firmly
in place.
Adjust the Dual Function Receive Volume Control Key
up to increase the volume.
Make sure the Remote is within range of the Base.
Separate and then reconnect the Rechargeable Battery
and Remote .
Return the Remote to the Charging Well for 5 seconds
to re-establish a communication link.
60653-01 10U100 UserGuide_r2 5/11/01 12:12 AM Page 20