Filter
Top Products
Important Information
5
Ǟ The telephone must not be used in wet environments (for example, bath
rooms).
Proper Use
Important: Auerswald products are not designed, manufactured or
intended for use or resale in environments requiring fail-safe performance,
such as in the operation of life-support systems and/or nuclear facilities.
Use or sale of our products for these purposes is only allowed with prior
written permission by Auerswald for each individual incident.
Important: Improper use may cause, e.g. functional restrictions or interfer-
ence, the destruction of the device or, in a worst case scenario, personal
injury.
Ǟ If you are still not sure of the intended use of the product after reading
the following section, please contact your vendor.
The COMfortel 1500 and COMfortel 2500 are system telephones.
System telephones are intended exclusively for connecting to an internal S
0
or
U
P0
port of the following PBX units from Auerswald: COMpact 2204 USB,
COMpact 2206 USB, COMpact 4406 DSL, COMpact 4410 USB, COMpact
5010 VoIP, COMpact 5020 VoIP, COMmander Basic (19"), COMmander
Basic.2 (19") and COMmander Business (19").
Note: Connecting to a PBX from another manufacturer or to the external S
0
connection of a network provider is not intended.
System telephones are not cordless and are intended for use in closed, dry
rooms.
System telephones are different from “normal telephones” connected to PBXs
in that they are especially easy to use. Most of the functions available on the
PBXs such as internal and external calls, Do-not-Disturb and call forwarding can
be operated over the display or by simply pressing previously programmed but-
tons. In addition, the PBX system telephones support offered functions for tele-
phone switch boards (for example, the Waiting Field) and various telephone
number lists (for example, the telephone book or call list).
System telephones can be configured using not only the menu displayed on the
device but also using the computer software included in the package. The com-
puter required for this is either connected directly to the telephone USB port
(only for the COMfortel 2500) or to a computer port on the PBX.
☞☞
☞