Audiovox FRS-WP1 Two-Way Radio User Manual


 
POWERING THE TRANSCEIVER
Your FRS-WP1 radio transceiver operates on four AAA batteries. Alkaline
batteries will provide slightly better performance than rechargeable batteries
and will ensure optimum performance for the FRS-WP1.
Batteries
There are three methods of powering the FRS-WP1:
1.Alkaline Batteries.
WARNING: Do not attempt to recharge Alkaline batteries.
2.Audiovox Rechargeable Ni-MH Batteries - (Rechargeable NiMH
batteries (P/N FRSRBAT) and Charging Adapter (Model No.
YKA3515-08010) sold separately.) Use only Audiovox approved
rechargeable batteries and charger when charging batteries internal
to the unit. For additional optional equipment and accessories for the
FRS-WP1, visit the Audiovox web site at www.audiovox.com, or
call Customer Service at 1-800-290-6650
NOTE: To extend battery life, avoid overcharging the batteries.
3. Various Brands of Rechargeable Batteries - Use of the supplied
Audiovox charger with other brands of rechargeable batteries is
not recommended, as battery charging times will vary with different
brands of batteries. Refer to the manufacturer’s instructions for
charging other brands of batteries.
Installing the Batteries:
Battery installation is made more convenient when the carry clip is removed.
To do this, release the spring latch securing the clip to radio and slide the clip
downward and away from the mounting stud.
-6-