Audiovox FRS-WP1 Two-Way Radio User Manual


 
Button Confirmation Tone
Whenever the VOL/Channel Up/Down or MON/FM buttons are pressed, the
speaker will sound a beep tone to confirm each press. In addition, when the
Channel (CH) button is pressed, a confirming tone melody sounds.
To Transmit:
1. Set the desired primary channel.
2. Press and hold the headset Push-to-Talk (PTT) button while speaking
slowly and clearly in a normal voice into the headset microphone.
3. The LCD backlight will come on while transmitting.
4. Release the PTT button when you finish speaking to receive incoming
signals.
To Receive:
1. Set the desired channel.
2. Adjust the volume control to the desired listening volume by using the up
and down buttons.
3. The transceiver will play strong received signals through through the head-
set.
Monitor Function:
The Monitor (MON) button can be used to play all signals present on a
channel. This is useful when communicating with other parties at extreme
range. The monitor function is accessed when the MON button is momentarily
pressed.
-12-