Filter
Top Products
-11-
Using the Monitor (MON) Button
To listen to channel activity with the squelch bypassed:
1. With the radio in the FRS standby mode, momentarily press the MON
button; the radio will enter the monitor receive mode as indicated by the
background noise.
2. To exit the monitor mode, momentarily press the MON button again; the
radio will return to the FRS standby mode.
FM Radio Selection
To access the FM mode:
1. With the radio in the FRS standby mode, press and hold the MON
button; the FM radio (Fr) indication appears on the display for 5 seconds
and then returns to the FRS channel number display.
NOTE: Even though the FM radio mode is active, you can still transmit
and receive the FRS signal. To inhibit the FRS receive signal
mode, press and hold the Channel (CH) button; FR appears on
the display. To exit this function, press and hold the CH button
again.
2. Now press the Channel (CH) button once; Searching (SE) appears on
the display, indicating the radio is searching for a strong FM station.
3. When a station is located, it will be heard in the headset; the display will
then automatically revert to the FRS channel number.
NOTE: If no FM station is acquired after several seconds, repeat step 2
to initiate another FM station search.
4. To exit the FM mode, press and hold the MON button for at least 2
seconds; a melody will sound, and the radio will revert to the FRS standby
mode.