Audiovox DT 911 Cordless Telephone User Manual


 
(S~~~8ER~
, ~~ ~." .-""'"-""-- M-.~
--
There are two ways to dial using
the QUI.MEM KEY
.Press TALK .
.Press QUI. MEM .
.The phone number stored in
memory location 00 will be
automatically dialed.
OR
.With the Handset OFF. press
QUI. MEM .
.The phone number stored in
memory location 00 will be
automatically dialed after a 2
second delay.
.The phone should be OFF .
.Press PROG .The PHONE LED
will flash quickly to indicate that the
unit is in program mode.
.Enter the memory location (00..20)
you wish to store the number in.
.Enter the phone number to be
stored, up to a maximum of 20
digits.
.Press MEM to store the number
and exit program mode. The unit
will emit a happy tone (a short
series of beeps) to confirm
successful programming ~nd exit
program mode.
.If programming is unsuccessful,
the unit will generate an error tone.
~~
~.
.The phone should be OFF.
.Press PROG .The PHONE LED
will flash quickly to indicate the unit
is in program mode.
~aolC~MoRWDrmNG:~" ' ,f3
~~ ;..D"'\' '~...;.=,'~,~- "v
The QUI. MEM key gives you one
button access to the MEMORY DIAL
number stored in memory location 00.
This may be a frequently dialed friend,
business, or emergency number, such
as 911.
22
rF
dt911.p6S
22
1998/6/23. A."f LO:OS
.-3:\.
-;::0
To program a speed dial location, do
the following:
To store the last number dialed into a
permanent memory location, do the
following: