Filter
Top Products
USING THE WALL MOUNT
ADApTOR
1. Position the wall mount bracket
on the base.
line up the tabs on the wall mount
adaptor with the holes on the
bottom of the base (Figure 1 }.
Snap the wall mount bracket firmly
in place.
2. Mount the base on the wall.
Position the base so the mounting
studs will fit into the holes on the
bottom of the base. Position the
power cord to extend down the wall
the phone is to be mounted on.
Slide the base down on the
mounting studs until it locks into
place.
Figure 1
<0-
<0-
<0-
3. Connect the telephone line cord.
The telephone line cord has a
snap-in plug at each end. Insert
one of the plugs into the jack on the
bottom of the base. Insert the other
end of the plug into the wall jack.
~
I
-fffi-
'Y
.
4. Plug the AC adaptor into an
electrical outlet and the DC
connector on the back of the
Base Unit.
Figure 2
16
5/15/98. 10:33 AM
OT911
16
,
~