Filter
Top Products
-.-
FLASH i
You can use your AUDIOVOX DT911
cordless phone with services such as
Call Waiting. Simply press the FLASH
key.
ANSWERING CALLS.
When the Handset is in the Base Unit
cradle, simply pick up the Handset to
answer an incoming call.
When the Handset is away from the
Base Unit press any key other than
OFF I MUTE or the Volume keys to
answer an incoming call.
,REDIAL ;
To REDIAL the last Aumb"er you
dialed, press the TALK key, then
press REDIAL. The phone will
automatically dial the number.
MAKING CALLS
1. Press the TALK key and wait for
a dial tone.
2. Then dial the number you want.
If you make a mistake when dialing,
press OFF to hang up, then press the
T ALK key to get the dial tone again.
HOLD ~
Press HOLD to place an active call
on hold.
The PHONE LED will flash to indicate
call is on hold.
Press HOLD again to return to
the call.
OrSCONNECTING
To eiid'a call, either place the handset
back in the Base Unit, or press OFF
-4-
~
~
EXTENSION IN USE INDICATOR
When another phone is in use on the
same fine, and the AUDIOVOX DT911
is in standby mode, the PHONE LED
will flash slowly.
MUTE c ,::~j
Press MUTE to disable the handset
microphone.
The MUTE/LO BArT LED will stay on
continuously.
Press MUTE again to return to two
way conversation.
RINGER MUTE c\; , ;- .~ .
,c,'.
Press MUTE during incoming ringing
to disable the ringer for the duration of
the call.
Extension In Use indication will not
function when the Handset is out of
range.
PAGE,
To page from the base, press
PAGE .
To cancel the page, either press
PAGE again on the base or press
OFF on the handset.
VOLUME CONTROLS
The volume controls for the handset
are located on the side of the unit.
Press the A or T keys to increase
or decrease the volume. Holding either
key down will continuously change the'
volume setting. The earpiece volume
level wil/ change accordingly. There
are four volume levels.
19
19
I
-@-
5115/98, 10'33 AM