Filter
Top Products
J~
" i ,
'r :..~-. TONE PULSE
J ; :1 SELECTION
SETTING UP YOUR AUDIOVOX
DT911
Choose an area near an electrical
outlet and a telephone wall jack.
~
[""1-- -, ,j.;
AC POWER ADAPTOR
Plug the AC power adaptor into an
electrical outlet and the DC connector
to the back of the base unit.
c:)
~
CHARGE THE HANDSET BATTERY
PACK BEFORE USE 'f ;
The battery pack rech'arges
automatically whenever the handset is
in the base unit. The battery pack must
be charged for 16 hours before using
your phone for the first time.
,
-(;))-
+
HANDSET RINGER
The handset ringer is programmed ON
as the factory default setting. Refer to
PROGRAMMING THE RINGER on
page # for more information.
SErTINGTHETONE/PULSE SWITCH
The TONE/PULSE switch is located on
the bottom of the base unit and is
factory set to TONE. If you have touch
tone service, do not change the switch
setting. If you have rotary {Pulse)
service, set the switch to PULSE.
CONNECT TELEPHONE LINE CORD
Plug one end of the telephone cord into
a wall jack, and the other end into the
back of the Base Unit.
14
5115198, 10'33 AM
-@-
I