Filter
Top Products
15
extreme range, the squelch should be set low to allow reception of weak sig-
nals. The squelch setting high (HI) or low (Lo) is applied to all channels.
To access the Squelch Level Scan menu,
- Press the Mode Button until the (S HI) or (S Lo) icon flashes on the
LCD panel.
- Press the Up or Down Button to toggle the squelch from high to low
setting.
- Press the PTT Button to confirm your selection.
Priority Scan Channel Selection Mode
This feature allows you monitor one particular channel while scanning other
channels at the same time. If you pre-set any priority channel other than the
current channel in use, the pre-set channel will be scanned every 0.5 second
and any strong signals on that channel will be played.
To access the Priority Scan menu,
- Press the Mode Button until the (PRIO) icon flashes on the LCD panel.
- Press the Up Button or Down Button to select the desired channel
number you wish to monitor. Only channels on the scan list will be
available as a priority channel.
- Press the PTT Button for 2 seconds to toggle a channel’s priority
status on or off.
NOTE: If PrErr displays when entering the priority channel selection mode,
this indicates that no channels have been selected to the scan list.
Two or more channels must be selected to the scan list for proper
operation of the priority channel feature.
Auto Key Lock Selection Mode
This feature prevents accidental channel change to the preferred settings of
the unit. The Auto Key Lock function temporarily disables the Up, Down
and Mode Buttons.
To access the Auto Key Lock selection menu,