Filter
Top Products
13
- To turn off the VOX feature, Rotate the volume control counterclockwise to
turn power OFF and then turn power ON again.
The VOX sensitivity level setting is dependent on the ambient background noise
and will need to be adjusted accordingly.
Auto Channel Scan List Selection Mode
This feature allows you to add or remove channels from the scan list.
To access the Auto Channel Scan/Skip List menu,
- Press the Mode Button until the Icon (SKIP) or (SCAN) flashes on the
LCD panel.
- Press the Up Button to enter the channel in the SCAN List.
- Press the Down Button to enter the channel in the SKIP List.
- Press the PTT Button to confirm your selection(s).
NOTE: Pressing the Down button will enter a given channel to the skip list
and then increment the display to the next channel number to be
assigned to either the skip or scan lists.
Scan Operation
To enable the scan mode,
- Press Scan Button momentarily (SC on) will appear on the LCD panel.
- When in scan mode, the display will show each channel on the scan
list as it is scanned. The unit will begin scanning for an active main
channel.
- When unit doesn’t find any signals and you want to transmit, press the
PTT switch to return to home channel operation. The transceiver will
automatically resume scanning 3 seconds after the communication
is completed.
- If there is no activity and you want to leave the scan mode, press the
Scan Button momentarily (SC off) will appear on the LCD panel and
unit will return to normal operation and (Scan) indicator will disappear
from LCD panel.