Filter
Top Products
8
Controls:
Power On-Off/Volume (15):
Turn the On-Off/Volume knob clockwise. You will hear a confirming melody to
indicate the unit is on. To turn the unit off, turn the On-Off/Volume knob counter-
clockwise.
To Adjust Volume:
Hold the Monitor Button down to listen to audio level while rotating the
On-Off/Volume knob. Clockwise to increase volume and counter-clockwise
to decrease volume.
Monitor/Lamp Button (2):
This button is used to to check activity on the current frequency before
transmitting. Check activity by holding down Monitor Button longer than
2 seconds and (MON) will apppear on the display. You will hear static if
frequency is clear.
Do not transmit if you hear conversation.
Hold
down the Monitor Button again longer than 2 seconds and (MON) will
disapppear from the display.
The monitor function will temporarily bypass the squelch setting and play all signals
on a given channel. This useful when comunicating with other parties at extreme
range.
By pressing this button momentarily, the LCD backlight is turned on; press
again and the LCD backlight is turned off.
The monitor function can be turned off by momentarily pressing the monitor/
lamp button once.
Push To Talk (PTT) Button (4):
Pressing and holding this button will allow you to speak to any transceiver
that is set to the same channel and privacy code setting as yours. Hold the
transceiver approximately 1 to 2 inches from your face as you speak into the
built in microphone (9). After you have finished speaking, release the PTT
Button to allow the reception of incoming signals. It is not possible to transmit
and receive at the same time. A red transmit LED (Transmit/Monitor Indicator)