Filter
Top Products
12
transmission. This will only allow you to ignore all traffic on a given
channel not using the same subcode.
CTCSS Mode Display
This feature allows you to display the CTCSS tone in either a channel num-
ber or frequency.
To change the display of the CTCSS tone to either a channel number or
frequency,
-Turn on the transceiver ON while pressing the Mode Button.
-Press the Mode Button until (tccode or tcfreq) appears.
-Press the Up Button or Down Button to select the code number display
or the frequency number display.
- Press the PTT Button to confirm your selection.
VOX Selection Mode
This option enables you to have hands-free conversation. Your voice or
the signal is detected and the radio transmits without the need to press the
PTT button.
To set radio for VOX operation,
- Rotate the volume control counterclockwise to turn power OFF.
- Press and hold PTT Button.
- Rotate the volume control clockwise to turn power ON.
To set the VOX sensitivity level,
- Press the Mode Button until the VOX icon flashes and (Vo _ _)
appears in LCD Panel.
- Press the Up Button or Down Button to select from 01 - 10 Voice
Levels with 01 being the least sensitive and 10 being the most
sensitive.
- The 01-10 Level setting determines VOX response sensitivity.
- Press the PTT Button to confirm your selection.