Filter
Top Products
54
Appendix
Adding and registering handsets
Your telephone can accommodate up to four cordless handsets. You can add
new handsets (TL70008, sold separately) to the TL72108/TL72208/TL72308
at any time, but each new handset must be registered with the telephone
base before use. Each handset must be registered separately.
The handset provided with your TL72108 is automatically registered as
handset 1. Additional handsets will be assigned numbers in the order they are
registered (handset 2, handset 3 and handset 4). You can register a maximum
of four handsets.
The TL72208 has two handsets automatically registered as handset 1 and
handset 2. You can register two additional handsets, which will be assigned as
handset 3 and handset 4.
The TL72308 has three handsets automatically registered as handset 1,
handset 2 and handset 3. You can register one additional handset, which will
be assigned as handset 4.
The TL72408 has four pre-registered handsets, so you cannot register any
additional handset to it.
Handsets purchased separately need to be registered to
the telephone base before use. When first purchased, all
optional accessory handsets will show NOT REGISTERED on
the screen. The new handset may need to be charged for
five minutes before registering to the main telephone base.
To register a handset to your telephone base
1. Place the unregistered handset into the telephone base.
If PRESS HNDST LOC 4 SEC ON BASE does not appear
on the handset screen after a few seconds, remove the
handset and place it in the telephone base again.
2. On the telephone base, press and hold HANDSET
LOCATOR for about four seconds (until the red IN USE
light on the telephone base turns on) and then release
the button. The handset will show PLEASE WAIT... and it
will take about 10 seconds to complete the registration.
The handset will show HS X REGISTERED and will beep if
the registration is successful.
NOTES:
1. If the registration is not successful, the display will show NOT
REGISTERED. To reset the handset, remove the handset from the
telephone base and place it back in. Try the registration process again.
2. You cannot register a handset if any other system handset is in use.
NOT REGISTERED
PRESS HNDST LOC
4 SEC ON BASE
PLEASE WAIT...
HANDSET X
REGISTERED