Filter
Top Products
Call transfer using intercom
Use the intercom feature to transfer an outside
call from one handset to another. (This feature is
not available on model TL72108.)
Models TL72208/TL72308/TL72408
1. During a conversation with an outside call,
press INT. The outside call is automatically
placed on hold and TRANSFER TO: is
displayed on the screen.
2. Enter a handset number. The screen will show
CALLING HANDSET X. The called handset will
ring, and its screen will show HANDSET Y IS
CALLING.
3. On the ringing handset, press PHONE/FLASH,
INT, SPEAKER, or any dial pad key (0-9, * or
#) to answer the intercom call. You can now
talk without the outside caller hearing the
conversation.
4. Press OFF/CLEAR on the calling handset
or place it in the telephone base or handset
charger to complete the transfer. The
calling handset’s screen will show CALL
TRANSFERED and the other handset will
automatically be connected to the outside
call.
NOTES:
1. Before the intercom call is answered, you can cancel the
transfer and return to the outside call by pressing
OFF/CLEAR, PHONE/FLASH, or INT.
2. If the called handset does not answer the intercom call
within 100 seconds, or if the other handset is in the
directory or call log mode, or out of range, the calling
handset will show UNABLE TO CALL TRY AGAIN on its
screen and will automatically return to the outside call.
3. You can switch between the intercom call and the outside
call by pressing INT on the calling handset. The display will
change between INTERCOM and OUTSIDE CALL to indicate
which party is active.
4. You can end the intercom call and return to the outside call
by pressing PHONE/FLASH on the calling handset.
Telephone operation
19