AT&T System 75 Telephone User Manual


 
Note: Each telephone number or feature code is
stored as a separate list item.
2
Pick up handset
[dial tone]
3
Dial Abbreviated Dialing Program code
[dial tone]
4
Dial personal list number (1, 2, or 3)
Version Note: If you are using System 75,
Version 1, you may omit Step 4.
5
Dial list item
(1, 2, 3...)
[dial tone]
6
Dial number you want to program
Version Note: If you are using System 75,
Version 1, you can use up to 16 digits;
for Version 2, you can use up to 24 digits.
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
7
Press [ # ]
[confirmation tone]
Number is stored
Repeat Steps 5 through 7 if you want to program
additional items on the same list; hang up and
begin again at Step 1 if you want to program
items on another personal list
8
Hang up to end programming
Note: Keep your own personal lists in the
Abbreviated Dialing table provided in the back of
this booklet; group, system, and enhanced lists are
available from your system manager.
To place a call using a
1
Dial appropriate Abbreviated Dialing List code:
personal, group, system,
List 1
or enhanced list
List 2
[dial tone]
List 3
2 Dial desired list item (1, 2, 3...)
Stored number is automatically dialed
24