AT&T System 75 Telephone User Manual


 
For example, to put a pause between the dialing
access number, 9, and the telephone number,
press the PAUSE button, then 12125551234 .)
Several depressions of the PAUSE button will
produce a multiple of a .5-second pause. (Three
depressions of the PAUSE button would equal 1.5
seconds.)
Programmable dialing buttons can also be used to
program system features. See your system
manager for system feature codes.
4
To program another programmable dialing button,
repeat Steps 2 and 3
5
Press the PROGRAM button when you are ready to
exit programming mode
To dial a number with a
1
programmable dialing
button
2
Pick up handset
or
if you are using an 8110 telephone,
you can press
[ Spkr ]
When you hear a dial tone, press the appropriate
programmable dialing button
Number programmed on the button is
automatically dialed
To erase a number stored
1
Press the PROGRAM button
on a programmable
2
Press button to be cleared twice
dialing button
3
Press the PROGRAM button
or
lift handset
Redial
To automatically redial
1
Pick up handset
the last number you
or
dialed (from the dial pad)
if you are using an 8110 telephone, you can
press
[ Spkr ]
[dial tone]
2
Press [ Redial ]
Number is automatically redialed
Note: You will hear a rapid error tone if the
dialed number is longer than 20 elements.
19